Alchemy Products

Electronic Design & Manufacture.

We enable you to be successful by designing and manufacturing innovative, sustainable, electronic products that provide solutions to you and your customer’s needs.

Providing clean, green, sustainable electronics solutions to the 21st Century Marketplace. 

Some of our Happy Clients
BSC Automotive Interface Solutions
TRW Automotive
Experia
BoviAid
Lucas
Cathodic Protection Co Ltd
MumStore UK

Work together with us

01.

Initial Concept

Let us help expand and develop your ideas and see how we can provide value to both you and your customers’ business.

02.

First Consultation

We’ll meet and work with you to listen, agree and fully understand your overall requirements and specification.

03.

Product Feasibility

Where detailed project specifications are not available, we’ll work with you to evaluate your requirements in full by undertaking a detailed feasibility process in order to fully evaluate the requirements of your project against state of the art technology available to achieving your goals.

04.

Project Quotation

From either the information you’ve provided or from a feasibility analysis undertaken, we will provide you with a detailed quotation and timescales for the works to be undertaken to complete your project.

05.

Raise Contract Purchase Order

Only when everyone is happy with the proposal and estimate will you raise an official purchase order to contract Alchemy Products to undertake the work on your behalf and it is at this point, timescales are agreed.

06.

Concept Re Evaluation

Once an order has been placed for the development ahead, we will work with you to completely re-evaluate the original concept and overall requirements in order to finalise in detail what the resultant development deliverables and function will be in a ‘measure twice cut once’ approach to ensuring that ‘no stone is left unturned’ and that the resulting project will be delivered as anticipated by all parties concerned.

07.

Design Process

Our designers will then get to work on your project using their skills and knowledge to bring your project to life.

08.

Design Process Schematic Stage

When our electronic designers have completed their initial phase of works, a  schematic diagram and supporting bill of materials relating to your specific project will be made available. Using this information, we might meet with you again, if required, in order to run through any design specifics that may require further discussion.

09.

Design Process PCB Layout

When the schematic assessment is complete, our electronics CAD engineers will then get to work ‘tracking out’ your electronics development into a virtual PCB using state of the art PCB Layout software.  

Using their skills and manufacturing knowledge they’ll bring your printed circuit board to life. See embedded videos regarding PCB structure, makeup and  manufacture.

The output from this process are data files containing Gerber Manufacturing information  for each of the PCB’s processing layers and a detailed, time stamped  industry costed Bills of Materials.

See video here.

 

10.

Printed Circuit Board Prototyping manufacture and verification

Using this manufacturing data we will then manufacture, in house, a small number of initial Printed Circuit Board Assembled samples in order for our Design engineers to test and verify and to embed Firmware software that has been written and developed in parallel processing with the PCB layout stage of operations.

If you already have all of your Printed Circuit Board Prototype manufacturing data available, please send to us for a prototype quotation. Send your Gerber Information, Specifications and Bills Of Materials to us for a quotation.

11.

Design and function sign off 

Once the prototype function, design and operation has been completely tested and verified by us and yourselves, we will make any necessary changes required to the manufacturing data and software and reissue the manufacturing intent production data that will formerly bring the project design stage to its close. We will typically meet with you for project hand over and sign off.

12.

Volume Printed Circuit Board Assembly and testing

We manufacture all types of printed circuit board assembly technologies in house in small to medium volumes. Working from free issued supplied kits to full component sourcing, let Alchemy Products take care of all your electronic manufacturing, testing and programming requirements.

If you already have all of your Approved Printed Circuit Board manufacturing data available, please send to us for a volume quotation. Send your Gerber Information, Specifications and Bills Of Materials to us, in confidence, for a quotation.

 

Just some of the wide variety of industries we work with.

About Us

We Help Business Owners Realise their Dreams

You’ve been thinking about that new idea or project now for sometime. How do you get that electronics project off the ground and start selling it to your customers. Luckily Alchemy Products Ltd have been successfully helping businesses design & manufacture electronic solutions for more than 20 years and can help.

Every project we undertake is unique and has different challenges. We ensure all our clients get the best solution for their business needs.

Testimonials

What Clients Are Saying

Rob Holden MD Cathodic Protection Ltd
“Great working with Graham and his team who quickly understood our project requirements and provided a quick and affordable solution for our project.”

Rob Holden - MD Cathodic Protection Co Limited

Catriona Pentry Director BoviAid
“Alchemy were lovely to work together with and very helpful guiding us through the designs process and testing of our new product before launch.”

Catriona Penty - Director BoviAid

John Kennedy Managing Director TRW Automotive
We have worked with many electronic businesses over the years but Graham and his team at Alchemy Products are the most professional and helpful organisation we have worked together with to date. As a business we’ve saved hundreds of thousands of pounds through engagement with various joint venture cost down initiatives instigated by Alchemy’s knowledge of their industry

John Kennedy - Managing Director TRW Automotive

David Hymers MD Total Post
"It was a pleasure to work with Alchemy who quickly helped us evaluate our project, make prototypes and get to market in record time. I would highly recommend their services."

David Hymers - MD totalpost ltd